Frame Relay was developed to solve communication problems that other protocols could not: the increased need for higher speeds, an increased need for large bandwidth efficiency, particularly for clumping ("bursty" traffic), an increase in intelligent network devices that lower protocol processing, and the need to connect LANs and WANs. Like X.25, Frame Relay is a packet-switched protocol. But the Frame-Relay process is streamlined. There are significant differences that make Frame Relay a faster, more efficient form of networking. A Frame-Relay network doesn't perform error detection, which results in a considerably smaller amount of overhead and faster processing than X.25. Frame Relay is also protocol independent-it accepts data from many different protocols. This data is encapsulated by the Frame-Relay equipment, not the network.

'Today's LANs and computing equipment have the potential to run at much higher speeds and transfer very large quantities of data. With the diversity and complexity of today's networks, management can be a mammoth task if you don't have the proper tools. Each environment is a unique combination of equipment from different vendors. Frame Relay uses a packet-switching technology, similar to X.25, but is more efficient. As a result, it can make your networking quicker, simpler, and less costly.

Frame Relay sends information in packets called frames through a shared Frame-Relay network. Each frame contains all the information necessary to route it to the correct destination. So in effect, each endpoint can communicate with many destinations over one access link to the network. And instead of being allocated a fixed amount of bandwidth, Frame-Relay services offer a CIR (committed information rate) at which data is transmitted. But if traffic and your service agreement allow, data can burst above your committed rate. Since Frame Relay has a low overhead, it's a perfect fit for today's complex networks. You get several clear benefits: First, multiple logical connections can be sent over a single physical connection, reducing your internetworking costs. By reducing the amount of processing required, you get improved performance and response time. And because Frame Relay uses a simple link layer protocol, your equipment usually requires only software changes or simple hardware modifications, so you don't

Definition 1. - DS3 service is a digital, dedicated private-line service giving you high capacity for any combination of data, voice or video applications. The versatility of DS3 Shadwell makes it ideal for data-intensive users with large backbone applications or private networks requiring channelized transport. The point-to-point structure of DS3 Service affords greater economies of scale by combining 28 DS1s or 672 separate 64 Kbps channels onto one communications path.

Definition 2. - For many years, the fastest, and unfortunately, the most expensive way to connect to the outside world was through a ds1 or T1 connection. DS stands for Digital Signal or Digital Service. Now more commonly used and not near as expensive as it used to be, Shadwell DS3 or Data Service Level 3 is the connection of choice for many large companies and places that require a lot of bandwidth. DS3 technology is used for T3 lines and allows connections to the Internet to reach speeds of up to 44.736 megabits per second.

Definition 3. - Digital carrier with a speed of 45Mbs. Equivalent of 28 DS1s. Also called T3.

Definition 4. - Digital Signal Level 3. Framing specification used in transmitting digital signals at 44.736-Mbps on a T3 facility (United States) or at 34.368-Mbps on an E3 facility (Europe).

An OC3 line is an ultra high-speed connection capable of transmitting data at rates up to 155 Mbps. Some ISP's, large corporations and universities with high-volume network traffic will require an OC3 if they have an extremely high volume of traffic that can't be handled by a DS3. An OC3 is so large that some ISP's use this as the backbone to their network. If you believe you're in the market for OC3 Service we recomend getting ahold of an expert.

While you may be an expert when it comes to network connections and data applications you will still want to have an expert by your side when it comes to pricing and negotiating for a connections. The expert to whom we refer is a broker or independent agent. In addition to being knowledgable of the technology a brokers expertice lies in his or her knowledge of carriers, their networks, their strengths and weakenesses and also in their relationship with sales managers and VP's at the companies. This means a better deal for you! Our Page Keywords Are: Shadwell frame relay Shadwell DS3 line Shadwell DS3 connection Shadwell DS3 service Shadwell DS3 provider Shadwell DS3 internet Shadwell DS3 internet connection Shadwell DS3 service provider Shadwell DS3 price Shadwell DS3 speed Shadwell DS3 internet service Shadwell DS3 internet access Shadwell fractional DS3 Shadwell DS3 bandwidth Shadwell DS3 internet service provider Shadwell DS3 internet provider Shadwell DS3 pricing Shadwell DS3 internet services Shadwell DS3 services. These keywords provide a brief overview of the services offered by ShopforDS3 in your city.

There is an opportunity to achieve significant cost reductions in your oc3 service. The key is using an expert broker. Brokers don't charge fees to the end user and they don't mark up the priceof the service. They are paid by the company which you sign with at the end. As the carrier doesn't have to pay an inside sales rep for the sale, they compensate the broker instead and maintain the same margin as though you went direct. Another advantage of the agent is the fact that he is paid on a residual basis. This means that he or she is interested in the longevity of your account and the level of your service.

Shadwell ShoreTel Dealers | Shadwell Nortel Dealers | Shadwell NEC Dealers | Shadwell Mitel Dealers | Shadwell Cisco Dealers | Shadwell IP PBX Phone System | Shadwell Avaya Dealers